大连CNC棒材加工自动化装备 使用说明
1.365速发国际 双手按周时按起动按扭，， ，，，，第一次装备会找事情原点，， ，，，，再次双手周时按起动按
扭装备会按设定的程序举行加工。。。。
2. 加工历程中榨取将手伸入事情区域内，， ，，，，加工历程泛起紧迫情形按急？？？赝
止装备。。。。
3. 程序事情完成后会自动回到事情起点，， ，，，，直至事情指示灯显示为红色一次加工
完成。。。。（泛起任何蜂鸣响声皆是非正常事情情形，， ，，，，请检查是否有阻挡异物或
程序问题）
4. 将夹具座锁紧，， ，，，，松开两头夹头将原质料取出完成加工。。。。
5. 装备使用完成后将电源关闭，， ，，，，装备应做好防尘以镌汰对滑动部件的损害。。。。
6. 按期为滑轨丝杆举行润滑包管使用顺畅。。。。
1. Dalian Lianghui Precision Machinery Co., Ltd. When pressing the start button with both hands, the first time the equipment will find the working origin, and when pressing the start button with both hands again, the equipment will process according to the set program.
During the processing, it is forbidden to reach into the work area. In case of emergency during the processing, press the emergency stop switch to stop the equipment.
3. After the program completes its work, it will automatically return to the starting point until the work indicator light shows red, indicating that the processing is completed in one go. (Any buzzing sound is an abnormal working condition. Please check if there are any obstructions or program issues.)
4. Lock the fixture seat tightly, release the clamp heads at both ends, and take out the raw material to complete the processing.
5. After using the equipment, turn off the power and ensure that the equipment is dust-proof to reduce damage to sliding parts.
6. Regularly lubricate the slide rail screw to ensure smooth use.
